These Companies are world leaders in their respective fields
in terms of product quality
 
 
  2    
Fire Fighting Systems
 
ELECTRICAL  DEVICES   EXTERNAL COMPONENTS FOR FIRE FIGHTING  SYSTEM
     
These electrical components  are required for the   ideal configuration of  fire protection piping system.
 
 
The Potter Model PFC-4410RC is a flexible multi-hazard releasing control panel that is  listed for use with pre-action and deluge sprinkler suppression systems and agent based fire suppression systems.  The panel allows custom programming  to accommodate any installation. UL/FM
 
 
 
Supervisory Switch   Fire Department Connections
     
Model OSYU-1 is used to monitor the open position of an  OS&Y outside screw and yoke) type gate valve.

Model PCVS is intended for Post Indicators.  UL/FM Approved.
 
 
Used by the Fire Fighting Service to supplement the fire protection water supply, increase system pressure and flow, by pumping into female inlet connections or to supplement or increase their own supply to obtaining water from male outlet connections (or hydrants.]. These connections are generally located at ground level (both inlets and outlets) or at the roof level (outlets only). ".
 
 
 
Flow Switch   Fire Hydrant
     
a vane type water flow switch used as a sectional water flow detector. The switches  are actuated when a flow of 10 GPM (38 LPM) or more occurs downstream of the device. The fl ow condition must exist for a period of time necessary to overcome the          selected retard period. UL/FM
 
 
Made in USA plant ISO 9001 certified.

Fire Hydrant Super Centurion 250 . Designed for efficient flow and outstanding, long term reliability. 250 psi. 
 
 
 
Pressure Switch   Adjustable Post Indicator
     
Designed for the detection of a water flow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves. The PS10 is also suitable to provide a low pressure supervisory signal; adjustable between 4 and 15 psi (0,27 and 1,03 BAR). UL/FM Approved.
 
 
Vertical type enables underground fire line valve to be operated at ground level with operating wrench 
 
 
 
Release Panel    
     
 The Potter Model PFC-4410RC is a flexible multi-hazard releasing control panel that is  listed for use with pre-action and deluge sprinkler suppression systems and agent based fire suppression systems.  The panel allows custom programming  to accommodate any installation. UL/FM Approved.  Click  for
 
   
   
 
  2    
 
 
© 2010. Al Saadeh Trading Establishment. All Rights Reserved. Designed By BitraNet